Using an RTMP connection, you can pull a live streaming broadcast into Production Truck to be used in a second broadcast. For a video walkthrough of this visit our Youtube Channel.

To do this you'll first need to have two broadcasts created. These broadcasts must either be your own or have permission and help from the owner of the other broadcast. 

For this explanation our broadcasts will be titled:

Broadcast A: (This will be the main broadcast that will pull in Broadcast B)

Broadcast B: (This broadcast will be the secondary broadcast being used as a camera)

We'll first need to go to

Go to edit Broadcast B and find the Syndication section. Click on RTMP Pull Endpoint and an orange cancel button will appear. Scroll to the bottom of the page and click Save.

Go Live with Broadcast B.

After it saves it'll take you to the top of the page, scroll back down to the Syndication section. You should now see an RTMP URL. Copy the RTMP address. This URL is what is going to be plugged into Production Truck. 

Before we do this though we need to make sure that Broadcast B is already streaming. This is very important because if you try and pull the RTMP URL before Broadcast B is live it will break the connection and that URL won't work again.

Note: There is a limit of one connection to a pull endpoint at a time. If you attempt to do a pull and it fails, we would recommend updating the broadcast for another RTMP pull.

To find your RTMP information to plug into Production Truck, we need to go back to Media > Broadcast Grid. On the broadcast grid, you should see your broadcast listed with some icons to the far right side of the broadcast. To find the RTMP information, you need to click on the "i" icon, which will take you to the Broadcast Details page. Inside of here, you would need to click Syndication and you will see your RTMP Pull Information.

If Broadcast B is live we can go to Production Truck where we will be streaming Broadcast A. 

Open the Network Devices section in the Preferences window. Click the '+' button to add a Network (Manual Entry) device group and Generic IP Device. In the URI field paste the RTMP Pull Endpoint address from Broadcast A

When the connection is made you'll see the broadcast appear in your camera preview window and a message box will appear in the preference window telling you that it was successful or if it encountered an error.

When the broadcast is appearing in Production Truck you are free to go live or use for clip capturing within replay.

If you have any additional questions, contact our support team by calling (859)-215-7979 or clicking 'New Support Ticket' at the top of this page.