These are instructions on how to use your custom transitions after we have notified you that it is ready for use.


  1. Open Production Truck
     
  2. Open the Video Clips window by clicking on the Video Clips button
     
  3. There are 2 custom transition buttons below the FLASH transition. Click on the 3 horizontal lines for one of the buttons. This will open another window.
     
  4. Click on the DOWNLOAD tab at the top of the window.  Set the SECTION to Any Section
     
  5. You should see the name of your transition with your logo off to the right.
     
  6. Just like with overlays click on the little white box to the left and then DOWNLOAD on the bottom of the window.
     
  7. Go to the OPEN tab You should see your custom transition there. Click on the white box and then click OPEN at the bottom of the window
The second window will close.

Now below the FLASH Transition you should see your transition. 


You can now select a clip and when you click on your transition it will play the transition, play the clip, and then play the transition again when the clip ends. 


Note: The process is the same for using the transition to switch between cameras. Just Open the transition in the list of transitions on the main screen. 



If you have any additional questions, contact our support team by calling (855) 812-2740 or clicking 'New Support Ticket' at the top of this page.