Many capture card devices require their own driver software to be downloaded in order to function properly. You will need to download the appropriate drivers for the brand of your device.


NOTE: Before starting be sure to unplug your capture device


TABLE OF CONTENTS


Downloading Drivers from Production Truck (Mac)

Drivers can be directly downloaded from within Production Truck. With Production Truck open, navigate to the top navigation bar and select Help. Then select Download Links. Finally, select the appropriate drivers for your capture card brand.


Blackmagic Drivers: ALL Blackmagic products require their drivers to be downloaded

Magewell Drivers: Most single camera Magewell devices do not require drivers, multi-camera Magewell devices do require drivers. 



This will then start the appropriate drivers to download to your computer. 


Downloading Drivers from Appropriate Website (Windows)

Blackmagic

In your internet browser go to www.BlackMagicDesign.com. Then, go to the Support Page. The link is at the top of the page. 



On the Support Page, scroll down until you see Latest Downloads on the left hand side. You DO NOT need select your device. Find the newest version of Desktop Video. Then click the Operating System that your computer uses. (Windows or Mac)



This will open a registration window. If you'd like you can register your device, OR just click Download Only in the bottom left corner of the window. This will begin your download. 



Magewell

In your internet browser go to Magewell's Download Center, then select the appropriate device. 



Select Driver from the various tabs and then select your operating system to the right, in this case it would likely be Windows. Then select Download



Installing Blackmagic Drivers

Once the download is complete open it from your downloads folder to unzip the folder. This will open a file called "Blackmagic_Desktop_Video_xx.x.dmg", with the appropriate version number. Double click this file. 


On a Mac, If you recieve an error message, that it Cannot be Opened, navigate to your Mac System Preferences, then Security & Privacy, under the General tab, at the bottom select Open Anyway.



A window will open up that will include the installer. It is a green icon titled "Install Desktop Video xx.x", double click this. You will now see the installation window. Follow the prompts to navigate through the standard install process. You will be asked for the password of the computer administrator. 


Note: We would recommend running the uninstaller if you already have a version of Blackmagic Desktop Video installed on your computer. 




After you've gone through the installation process it'll prompt you to restart the computer. Restart your computer. While the computer is restarting you can plug your device in. 


After your computer restarts and you've plugged your device(s) back in you may be prompted to perform a firmware update for your device. Always be sure to do it. 


You're Blackmagic drivers are now up to date! 


Installing Magewell Drivers

Once the download is complete open it from your downloads folder to unzip the folder. This will open a file called "ProCaptureDriverfor_xxxx", with the appropriate version number. Double click this file. 


On a Mac, If you recieve an error message, that it Cannot be Opened, navigate to your Mac System Preferences, then Security & Privacy, under the General tab, at the bottom select Open Anyway.



A window will open up that will include the installer. Follow the prompts to navigate through the standard install process. You will be asked for the password of the computer administrator. 



After you've gone through the installation process it'll prompt you to restart the computer. Restart your computer. While the computer is restarting you can plug your device in. 


After your computer restarts and you've plugged your device(s) back in you may be prompted to perform a firmware update for your device. Always be sure to do it. 


You're Magewell drivers are now up to date!


Further Troubleshooting

Not seeing Capture Card as a Source option


If on a Mac, this maybe a result of a security setting. Navigate to your Mac's System Preferences, then select Security & Privacy. 


Under the Privacy tab, select Camera, and then ensure that Production Truck is checked on the right hand side. If it is not, and you make the change, you will need to restart Production Truck. You may also need to do this for your Microphone setting. 


Capture Card is selected as Source, but just a black screen


If Production Truck detects the device(s) and they show up under the source drop down but there is no video, check all of your video formats between your camera, driver software, and in Production Truck. Also, check to make sure your camera is set to output the video through the correct channels (HDMI or SDI).


If you have any additional questions, contact our support team by calling (859)-215-7979 or clicking 'New Support Ticket' at the top of this page.