How To Set Up Network On Camera

Follow the sequence in the image below and run through the Wizard on the camera. This can be done via a wireless adapter or ethernet connect via a USB ethernet adapter.


How To Live Stream Via RTMP


  • When network is set up on the camera, press Status button on inside of camera.
  • Find the IP Address listed on the Network screen (ex. 192.168.1.132)
  • Enter this IP Address into web browser address bar
  • Enter username and password (default to Username: jvc Password: 0000
  • Once on the JVC web interface go to Settings 

  • Select Live Streaming

  • Choose a Server slot to setup for your RTMP information
  • Edit the Server information with an Alias (Name), Type (RTMP), URL & Stream Key (for destined streaming service). Then Save.

To Start the RTMP livestream on the camera


  • Open Main Menu on the camera (menu button to top-left of screen)
  • Choose System
  • Navigate down and choose Settings under Network (When Network turned On)
  • Under Network Settings choose Live Streaming Settings
  • Navigate to Server and select the RTMP server name that you created the broadcast under on the JVC web interface. In the screenshot above it would show as "BFTest"
  • Within the Live Streaming Settings ensure that the resolution, frame rate and bit rate all are set to something that is appropriate for the accompanying stream plan the user is on and also the internet connection they have. Often would be set to (1280x720, 30p, 3.0m)
  • Once everything is set and ready to start sending the feed to vCloud (or other streaming service), navigate to Live Streaming and turn it 'On'
  • This will start the stream on that RTMP information and you can verify that the broadcast is receiving the stream


How To Bring JVC Camera Into Production Truck via Auto Discovery


  • When network is set up on the camera, press Status button on inside of camera.
  • Find the IP Address listed on the Network screen (ex. 192.168.1.132)
  • Enter this IP Address into web browser address bar
  • Enter username and password (default to Username: jvc Password: 0000
  • Once on the JVC web interface go to Settings 
  • Select Live Streaming
  • Choose a Server slot to setup for your RTMP information
  • Edit the Server information with only an Alias (Name), Type (RTSP), then Save.
  • Navigate back to the Live Streaming Settings 
  • Select this RTSP server, just created, as the Server
  • Select Streaming Server, navigate to the RTSP server set up and enter password as 0000  
  • Turn Live Streaming 'On'
  • Open Production Truck (Mac) and go to your Camera Source/Device list.
  • Under Auto Discovery select the HM200 series device listing
  • Add the camera username and password (jvc; 0000)

  • Select this device as your camera source


Tip: One of camera’s eight User Buttons can be assigned to Streaming function. Menu → Camera Function → USER Switch Set → USER# → Live Streaming